Elecraft KXPA100 Programmers Reference Manuel d'utilisateur télécharger pdf (Page 19)

^PV (Reflected (reverse) Power, GET only)

GET format: ^PV;

RESPONSE format: ^PVnnnn; where nnnn is the reflected power from the antenna connector, in tenths

of watts. For example, ^PV0034; indicates a reflected power of 3.4 watts.

^RS (Reset, SET only)

SET format: ^RS;

^RS; resets the microcontroller. This is equivalent to removing the power plug and plugging it back in

again.

^RV (Firmware Revision, GET only)

GET format: ^RV;

RESPONSE format: ^RVnn.nn;

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Pas de commentaire

Elecraft KXPA100 Programmers Reference Manuel d'utilisateur Page 19